Re-epoxy an Old Epoxy Floor

by djpolymath in Workshop > Home Improvement

1444 Views, 3 Favorites, 0 Comments

Re-epoxy an Old Epoxy Floor

Instructions to prep and re-coat an old epoxy floor.

Prep

2021-09-11 14_57_04-TSP - Google Search.png

Scrub the floor with TSP and rinse with water. Run a wire brush on an angle grinder over the surface to remove any old loose epoxy. Use a sanding pole to rough the surface with 120 grit sand paper. Vacuum the floor. Wipe with a damp rag. Vacuum again.

Armorseal 1000 HS

2021-09-11 10_18_42-Allway 10.5-in Steel Spiral Mixing Arms in the Mixing Arms department at Lowes.c.png

2021-09-11 10_19_14-Amazon.com_ Wooster Brush R232-9 Epoxy Glide Roller Cover, 1_4-Inch Nap, 9-Inch .png

Mix part A and B of epoxy in a 5 gallon bucket with a drill mixer. Apply epoxy in sections with epoxy roller.

Flakes

2021-09-11 10_21_12-seed spreader battery - Google Search.png

Apply flakes to coated areas with a seed spreader.

Rexthane

2021-09-11 10_19_41-Amazon.com_ Wooster Brush R207-9 Mohair Blend Roller Cover 1_4-Inch Nap, 9-Inch .png

After the epoxy is dried apply a clear coat of rexthane with a mohair roller for extra protection.

Complete