Laser Output Power Adjust Components

by Laserse in Circuits > Electronics

187 Views, 1 Favorites, 0 Comments

Laser Output Power Adjust Components

976nm - 980nm Fibre-Coupled Acousto-Optic Modulator AOs.jpg

We use this AOM to adjust the laser output power rapidly. You can get a 0mW then Max output power rapidly.

Step 1 Connect the AOM to RF Driver With SMA Cable

fiber coupled aom 1064nm (2).png

You need to connect the AOM to RF driver firsly to avoid AOM damage

Step2 Connect One End of the Fiber to Laser

976nm - 980nm Fibre-Coupled Acousto-Optic Modulator AOs.jpg

Secondly connect one end of the fiber to Laser

Step3 Connect the Other End of the Fiber to Laser Receiver

1550 - 副本 (2).png

Connect the other end of the fiber to laser receiver

Step4 Input the Signal From the Driver

Then you can adjust the Laser output power fastly. It will be 0mW or the max output power.