Coat Stand
- With some old screws from railroad tracks, I decided to use them to create a different coat stand. I give shape to the wood in a peculiar way. I leave a video where you can check how I made this coat stand.
-
If you like, check my channel, please Subscribe to my Youtube Channel
MATERIALS:
3 RAILROAD TRACKS SCREWS
1 PIECE OF TIMBER 60X18X4
- 2 BRACKETS FOR A KITCHEN FURNITURE
- 1 SPRAY VARNISH BOTTLE
- NOGALINA
Set Out the Screws on the Piece of Timber to Check Where You Want to Fit.
Make the Drills at Your Convenience; We Give 5 Milimeters Less Than the Screw.
Draw Up the Form for the Piece of Timber.
In My Case, I Use a Circular Saw With Flap Disc With 36 Grane , We Must Lower the Inside of the Lines.
With a Sander, We Must Sand Down With a Thinner Grape From 100 and Then to 180.
Dye With Nogalina, Once It Has Been Diluted in Water.
We Clean the Screws With a Drill and a Wire Brush.
We Lower in the Back to Hide the Hangers.
We Put the Brackets for a Kitchen Furniture.
We Put the Screw With a Adjustable Wrench.
We Varnish Whith the Spray and It Will Be Ready.
