Car Polisher Using Drill Machine

by sandilya.anisetty in Workshop > Cars

40822 Views, 27 Favorites, 0 Comments

Car Polisher Using Drill Machine

DSCN3389.JPG
Build your own car polisher using drill machine with low cost.

Parts and Tools Needed

DSCN3363.JPG
DSCN3364.JPG
DSCN3365.JPG
DSCN3366.JPG
DSCN3367.JPG
DSCN3368.JPG
DSCN3370.JPG
DSCN3371.JPG
DSCN3378.JPG
Drill machine
Sponge
Synthetic rubber adhesive
Dent removal stem from pops-a-dent
Spray can cap
screws
knife

Cutting the Sponge

DSCN3372.JPG
DSCN3373.JPG
DSCN3376.JPG
Draw a circular shape on the sponge and cut it. The circular shape should be more than the cap that you are using.

Cutting the Cap

DSCN3377.JPG
Cut the cap so that the height of the cap is reduced.

Attaching the Stem to the Cap

DSCN3379.JPG
DSCN3380.JPG
DSCN3383.JPG
DSCN3385.JPG
Place the stem on the center of the cap and mark the holes. Drill at least two holes and screw it as shown in the picture.

Gluing the Sponge to the Cap

DSCN3386.JPG
DSCN3387.JPG
DSCN3388.JPG
Apply the S R adhesive on both the cap and the sponge. Leave it for one minute and attach it.

Final Product

DSCN3389.JPG
Now you can polish your car or bike.