Air Rifle Pellet Carrier

by rayconnn in Outside > Hunting

914 Views, 1 Favorites, 0 Comments

Air Rifle Pellet Carrier

holes.jpg

got this idea from my black powder days of a primer carrier

Supplies

3/16 x 6 x 6 rubber gasket material (available from hardware as a "plumbers gasket repair assortment)

leather hole punch, knife, straight edge and/or ruler

Trim Gasket to Width (I Went With 3/4 Inch

IMG_20190924_064118.jpg

Mark and Trim Ends to Dress It Up a Little

IMG_20190924_064349.jpg
IMG_20190924_064940.jpg

Punch Holes- I Spaced Them About 1/2 Inch Apart , That Gave Me 11 Holes for 10 Pellets and a Lanyard

punch.jpg

After Making a Pellet Seater I Attached All Together With a Lanyard

seater.jpg

The Seater Is a 1/2 Inch Dowel With a Bbq Skewer for the Center Pin to Seat the Pellet, Cut It Long at First So You Can Trim It to Get the Depth on the Pellet You're Happy With